[ad_1] While Amazon has been busy handling employee protests, warehouse closures, investigations and an uptick in demand, employees have been working behind the scenes to develop face shields for frontline workers. To date, Amazon has donated nearly 10,000 face shields, and over the next few weeks, it plans to make hundreds of thousands available at-cost […]
Category: 3d-printed
This 3D-printed foam expands up to 40 times its original size
[ad_1] Until now, the size of 3D-printed objects has been limited by the size of 3D printers. In most cases, in order to produce large items used in, say, aerospace, manufactures have had to fasten, weld or glue smaller 3D-printed substructures together. But that might change soon. A team from UC San Diego developed a […]
FDA clears Formlabs’ 3D-printed BiPAP-to-ventilator converter
[ad_1] Formlabs/Lee Weissman For hospitals that might not be able to print their own, Formlabs is using 150 3D printers at its Massachusetts headquarters to print the adapters. Once production is fully ramped up, the company expects to print up to 3,000 parts per day. “Formlabs’ EUA for BiPAP adapters signifies the need for these […]
NVIDIA’s chief scientist developed a low-cost, open-source ventilator
[ad_1] The ventilator can be assembled in just minutes, attached to a simple display and packed into a Pelican carrying case. Dally built the prototype using off-the-shelf components for about $400. Produced in quantity, it could cost less than $300, and using open-sourced, 3D-printed parts, the price might drop below $100, he says. According to […]